Electronic Music Wiki
Register
Advertisement
Roland MPU-401

Roland MPU-401 (top-cover removed).

The MPU-401, where MPU stands for MIDI Processing Unit, was an important interface for connecting MIDI-equipped electronic music hardware to personal computers. It was designed by Roland Corporation, originator and co-author of the MIDI standard.[1]

When introduced in 1984, the MPU-401 was the first MIDI-equipped PC sound card, capable of MIDI sound processing[2] and sequencing.[3][4] After Roland sold MPU sound chips to other sound card manufacturers,[2] it established a universal standard MIDI-to-PC interface,[5] with a number of sound card manufacturers and most computer software companies supporting the interface.[2] It remained the de facto standard up until the 1990s, when its dominance began diminishing,[6] as computer processors became powerful enough to effectively handle MIDI sound processing.[2]

Design[]

Released around 1984, the original MPU-401 was an external breakout box providing MIDI IN/MIDI OUT/MIDI THRU/TAPE IN/TAPE OUT/MIDI SYNC connectors, for use with a separately-sold interface card/cartridge ("MPU-401 interface kit") inserted into a computer system. For this setup, the following "interface kits" were made:

  • MIF-APL: For the Apple II.
  • MIF-C64: For the Commodore 64.
  • MIF-FM7: For the Fujitsu FM7.
  • MIF-IPC: For the IBM PC/IBM XT. It turned out not to work reliably with 286 and faster processors. Early versions of the actual PCB had IF-MIDI/IBM as a silk screen.[7]
  • MIF-IPC-A: For the IBM AT, works with PC and XT as well.[7]
  • Xanadu MUSICOM IFM-PC: For the IBM PC / IBM XT / IBM AT. This was a third party MIDI card, incorporating the MIF-IPC(-A) and additional functionality that was coupled with the OEM Roland MPU-401 Breakout Box. It also had a mini audio jack on the PCB.[8][9]
  • MIF-MSX: For the MSX.
  • MIF-PC8: For the NEC PC-88.
  • MIF-PC98: For the NEC PC-98.
  • MIF-X1: For the Sharp X1.
  • MIF-V64: For the Commodore 64.[10]

In 2014 hobbyists built clones of the MIF-IPC-A card for PCs.[11]

Variants[]

Later, Roland would put most of the electronics originally found in the breakout box onto the interface card itself, thus reducing the size of the breakout box. Products released in this manner:

  • MPU-401N: an external interface, specifically designed for use with the NEC PC-98 series notebook computers. This breakout-box unit features a special COMPUTER IN port for direct connection to the computer's 110-pin expansion bus. METRONOME OUT connector was added. Released in Japan only.
  • MPU-IPC: for the IBM PC/IBM XT/IBM AT and compatibles (8 bit ISA). It had a 25-pin female connector for the breakout box, even though only nine pins were used, and only seven were functionally different: both 5V and ground use two pins each.
  • MPU-IPC-T: for the IBM PC/IBM XT/IBM AT and compatibles (8 bit ISA). The MIDI SYNC connector was removed from this Taiwanese-manufactured model, and the previously hardcoded I/O address and IRQ could be set to different values with jumpers.
  • MPU-IMC: for the IBM PS/2's Micro Channel Architecture bus. In earlier models both I/O address and IRQ were hardcoded to IRQ 2 (causing serious problems with the hard disk as it also uses that IRQ); in later models the IRQ could be set with a jumper. It had a 9-pin female connector for the breakout box.[12]
    File:MPU-IMC IRQ Selection.jpg

    The IRQ selection on the MPU-IMC

    . Due to the incompatibility of IRQ 2/9 (and potentially I/O addresses) between the MPU-IMC and IBM PS/2 MCA models certain games will not work with MPU-401.[13]
  • S-MPU/AT (Super MPU): for the IBM AT and compatibles (16 bit ISA). It had a Mini-DIN female connector for the breakout box. The MIDI SYNC, TAPE IN, TAPE OUT, METRONOME OUT connectors was removed, but a second MIDI IN connector was added. A TSR has to be loaded for the MPU-401 to be intelligent in MS-DOS.
  • S-MPU-IIAT (Super MPU II): for the IBM or compatible Plug and Play PC's (16 bit ISA). It had a Mini-DIN female connector for the breakout box with two MIDI In connectors and two MIDI Out connectors. A TSR has to be loaded for the MPU-401 to be intelligent in MS-DOS.
  • LAPC-I: for the IBM PC and compatibles. Includes the Roland CM-32L sound source. A breakout box for this card, the MCB-1, was sold separately.
  • LAPC-N: for the NEC PC-98. Includes the Roland CM-32LN sound source. A breakout box for this card, the MCB-2, was sold separately.
  • RAP-10: for the IBM AT and compatibles (16 bit ISA). General midi sound source only. MPU-401 UART mode only. A breakout box for this card, the MCB-10, was sold separately.
  • SCP-55: for the IBM and compatible laptops (PCMCIA). Includes the Roland SC-55 sound source. A breakout box for this card, the MCB-3, was sold separately. MPU-401 UART mode only.[14]

Still later, Roland would get rid of the breakout box completely and put all connectors on the back of the interface card itself. Products released in this manner:

File:Roland MPU-IMC.jpg

Roland MPU-IPC, the rare 'Micro Channel' version of the card.

File:Roland MPU-401AT.jpg

Roland MPU-401AT

File:Roland MPU-PC98II panel.jpg

Roland MPU-PC98II

  • MPU-APL: for the Apple II series. Single-card combination of the MIF-APL interface and MPU-401, featuring MIDI IN, OUT, and SYNC connectors.
  • MPU-401AT: for IBM AT and "100% compatibles". Includes a connector for Wavetable daughterboards.
  • MPU-PC98: for the NEC PC-98.
  • MPU-PC98II: for the NEC PC-98.
  • S-MPU/PC (Super MPU PC-98): for the NEC PC-98.
  • S-MPU/2N (Super MPU II N): for the NEC PC-98.
  • SCC-1: for the IBM PC and compatibles. Includes the Roland SC-55 sound source.
  • GPPC-N & GPPC-NA: for the NEC PC-98. Includes the Roland SC-55 sound source.[15]

Clones[]

By the late 1980s other manufacturers of PCBs developed intelligent MPU-401 clones. Some of these, like Voyetra, were equipped with Roland chips whereas others had retro-engineered ROMs (Midiman / Music Quest).[16][17]

Examples:

  • Midiman MM-401 (8BIT, non Roland chip set, also sold as part of the Midiman PC Desktop Music Kit)[18]
  • Music Quest PC MIDI Card / MQX-16s / MQX-32m (8 & 16BIT, non Roland chip set)
  • Voyetra V-400x / OP-400x (V-4000, V4001, 8BIT, Roland chip set)
  • MIDI LAND DX-401 (non Roland chipset)
  • Data Soft DS-401 (non Roland chipset) [19]

In 2015 hobbyists developed a Music Quest PC MIDI Card 8BIT clone.[20]

Modes[]

The MPU-401 can work in two modes, normal mode and UART mode. "Normal mode" would provide the host system with an 8-track sequencer, MIDI clock output, SYNC 24 signal output, Tape Sync and a metronome; as a result of these features, it is often called "intelligent mode". Compare this to UART mode, which reduces the MPU-401 to simply relaying in-/outcoming MIDI data bytes.

As computers became more powerful, the features offered in "intelligent mode" became obsolete, as implementing them in the host system's software became more efficient (than paying for dedicated hardware that will do them). As a result, the UART mode became the dominant mode of operation, with many clones not supporting the "intelligent mode" at all, being advertised as MPU-401 compatible.

SoftMPU[]

In the mid 2010s a hobbyist platform software interface, SoftMPU, was written that upgrades UART (non intelligent) MPU-401 interfaces to intelligent MPU-401 interface.[21]

HardMPU[]

In 2015 a PCB (HardMPU)[22] was developed that incorporates SoftMPU as logic on hardware (so that the PC's CPU does not have to process intelligent MIDI). [23]

Contemporary interfaces[]

Physical MIDI connections are increasingly replaced with the USB interface, and a USB to MIDI converter in order to drive musical peripherals which do not yet have their own USB ports. Often, peripherals are able to accept MIDI input through USB and route it to the traditional DIN connectors. The MPU-401 is no longer supported by any of the major operating systems.

References[]

  1. Kirn, Peter (2011) (in en). Keyboard Presents the Evolution of Electronic Dance Music. Backbeat Books. ISBN 978-1-61713-446-3. https://books.google.co.uk/books?id=IbtJAgAAQBAJ&pg=PT72&lpg=PT72&dq=%22mark+vail%22+808&source=bl&ots=dOOpEyQGfI&sig=nPF6yAIeQlupw3Pw0Drg6LE34r4&hl=en&sa=X&ved=0ahUKEwir3b7qhsfRAhUFJcAKHfSNCyMQ6AEIHzAB#v=onepage&q=%22mark%20vail%22%20808&f=false. 
  2. 2.0 2.1 2.2 2.3 MIDI INTERFACES FOR THE IBM PC, Electronic Musician, September 1990
  3. Programming the MPU-401 in UART mode
  4. MIDI PROCESSING UNIT MPU-401 TECHNICAL REFERENCE MANUAL, Roland Corporation
  5. Peter Manning (2013), Electronic and Computer Music, page 319, Oxford University Press
  6. David Trubitt (1993), Making Music with Your Computer, page 22
  7. 7.0 7.1 Nerdly Pleasures: Tutorial : How to Get the Roland MT-32 working with DOS Games
  8. http://cgi.ebay.com/151872767732
  9. https://books.google.com/books?id=nuXmVNll5JEC&pg=PA268&lpg=PA268&dq=Xanadu+MUSICOM+IFM-PC&source=bl&ots=LOc5jV91nw&sig=u4-V8Mdxkp1FSGBdJWCPXeGFk3g&hl=en&sa=X&ved=0CB8Q6AEwAGoVChMInIzY1rf1yAIVBSgeCh3f0Abu#v=onepage&q=Xanadu%20MUSICOM%20IFM-PC&f=false
  10. http://www.ebay-kleinanzeigen.de/s-anzeige/roland-mif-v64/353231030-172-3377
  11. http://www.amibay.com/showthread.php?57231-Cloning-an-MIF-ISA-Card
  12. http://ps-2.kev009.com/ohlandl/sound/Roland_MPU-IMC.html
  13. http://www.vogons.org/viewtopic.php?f=29&t=39999
  14. http://www.synthmanuals.com/manuals/roland/scp-55/owners_manual/
  15. http://xv2020.s14.xrea.com/index_old.html
  16. http://www.vogons.org/viewtopic.php?f=5&t=17341&start=4280
  17. http://www.vogons.org/viewtopic.php?f=46&t=40153
  18. http://cgi.ebay.com/281419543434
  19. http://www.vogons.org/viewtopic.php?f=46&t=46474&p=473347#p473347
  20. http://www.vogons.org/viewtopic.php?f=46&t=43875
  21. SoftMPU - VOGONS
  22. https://github.com/ab0tj/HardMPU/
  23. HardMPU, anyone? - VOGONS

References[]

Advertisement